Ver el código de «Jailbreak:Mouse USB Logitech M100»

<strong> Jailbreak Mouse USB Logitech M100 </strong>

[[Category: Jailbreak]]
== Tutorial ==
* '''.: Dissassembly'''
*: This set of photos describes the disassembly procedure for the Logitech M100. For a reassembly, start at the bottom and work your way up. The mouse was very easy to take apart and only require a screwdriver for the single screw. The internals are mostly held in place by the tension placed on them by the casing.
* '''.: So easy a cave-engineer could do it'''
* Let us begin. Here is the product packaging
*: [[Archivo:Mouse-USB-Logitech-M100-10.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-09.jpg|thumb|none|500px]]
* Inside was the mouse and the manual
*: [[Archivo:Mouse-USB-Logitech-M100-07.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-08.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-06.jpg|thumb|none|500px]]
*The first step was to remove the one screw in the bottom of the mouse. After doing this the two pieces slid apart
*: [[Archivo:Mouse-USB-Logitech-M100-22.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-05.jpg|thumb|none|500px]]
* A closer view of the two halves
*: [[Archivo:Mouse-USB-Logitech-M100-12.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-13.jpg|thumb|none|500px]]
* More angles. The board is well laid out, and the micro is clearly visible
*: [[Archivo:Mouse-USB-Logitech-M100-14.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-15.jpg|thumb|none|500px]]
* I plugged it in again and you can see how bright the LED really is. I believe this to be a white LED, turned red by it's plastic housing
*: [[Archivo:Mouse-USB-Logitech-M100-11.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-12.jpg|thumb|none|500px]]
* Buttons!
*: [[Archivo:Mouse-USB-Logitech-M100-01.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-02.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-03.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-04.jpg|thumb|none|500px]]
* Wheels! This is the wheel assembly.
*: [[Archivo:Mouse-USB-Logitech-M100-23.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-24.jpg|thumb|none|500px]]
* Up close view of the optical sensor for the mouse wheel and infrared or uv diode.
*: [[Archivo:Mouse-USB-Logitech-M100-25.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-26.jpg|thumb|none|500px]]
* The board outside of the housing, and the removal of the USB connector
*: [[Archivo:Mouse-USB-Logitech-M100-27.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-28.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-17.jpg|thumb|none|500px]]
* The underside of the PCB, note the PCB is single sided. Here we also get an excellent look at the lens which is removable
*: [[Archivo:Mouse-USB-Logitech-M100-18.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-19.jpg|thumb|none|500px]]
*Removing the lens reveals the optical sensor which controls mouse movement. The sensor is built into the bottom of the microcontroller package
*: [[Archivo:Mouse-USB-Logitech-M100-20.jpg|thumb|none|500px]]
*: [[Archivo:Mouse-USB-Logitech-M100-21.jpg|thumb|none|500px]]
* By: Jeremy Lewis http://courses.ece.msstate.edu/ece4723/dissect/097855063953/